Robot mower slope: percent vs. degrees
The unit beside the slope rating can change the purchase decision. Read it before comparing two mowers.
What a percentage actually says.
A slope of 30% rises 30 units for every 100 units of horizontal distance. It does not mean a 30-degree angle. A 30% grade is about 16.7 degrees; a 30-degree slope is about 57.7%. Those are very different demands on a mower.
Use horizontal distance for the denominator, not distance measured along the sloping ground. If you already have a reliable angle measurement, the calculator accepts degrees directly. Avoid walking or attempting measurements on an unsafe bank. An installer can assess difficult sections.
Angle in degrees = atan(slope % ÷ 100) × 180 ÷ π
Slope % = tan(angle × π ÷ 180) × 100
| Slope (%) | Approximate degrees | Meaning |
|---|---|---|
| 20% | 11.3° | 20 rise per 100 horizontal |
| 30% | 16.7° | 30 rise per 100 horizontal |
| 45% | 24.2° | 45 rise per 100 horizontal |
| 80% | 38.7° | 80 rise per 100 horizontal |
| 100% | 45.0° | Equal rise and horizontal run |
Measure the hardest section, not the average.
A gently sloping lawn may still have one short bank that decides whether a mower can cover the whole area. Record the steepest part that must be mowed, any turning point on a slope, and whether the surface becomes soft or slippery. An average slope for the entire property can hide that problem.
The YardFit shortlist currently uses the advertised interior limits of 45% for the Navimow i210 AWD, 84% for the X430 and 80% for the Mammotion LUBA 3 AWD. These are manufacturer specifications. They do not establish that a machine can safely turn, brake or retain grip on every lawn at that grade.
An edge is a different situation.
A maximum climbing specification does not automatically apply at the lawn boundary. The mower may have less space to turn or recover beside a pond, retaining wall or road. Manufacturers can specify separate edge limits, setbacks or physical barriers. Do not substitute an interior figure for those instructions.
Our calculator asks about boundary hazards and flags them for manual review. It deliberately does not clear an edge using the interior rating. If your boundary slopes, obtain the current instructions for the exact model and regional version before making a purchase.
Leave room for uncertainty.
A result within 10% of a model's advertised maximum triggers an additional warning. This is an editorial prompt to seek advice, not a manufacturer-approved safety factor. Even a result well below the stated maximum can fail because of wet turf, ruts, loose soil, obstacles or a poor approach angle.
Enter your slope in its original unit. YardFit will display both units and show which models pass the initial area-and-slope screen.
Check my slope →Sources and limits
Manufacturer specifications checked November 14, 2026: i210 AWD, X430, LUBA 3 AWD. Consult Navimow's current manuals and Mammotion support for installation instructions. Degree values in the table are mathematical conversions, rounded to one decimal place.